How do I mount?

You ordered a street name or house number from www.decasanoua.ro and finally the product has arrived!

A small assembly session follows, which we recommend that you do with a qualified person. The lines below are fitting suggestions and will not be considered as the manufacturer's certified method.

In the variant of application on decorative plaster (house with polystyrene, mesh and plaster) or on metal surfaces (mailboxes) you can use universal adhesives (example: Bison, Den Braven, Moment, etc...) which are specified for use on stone , marble, ceramics, tiles and tiles, glass. Pay attention to 2 additional factors: the adhesive's resistance to water and temperature.

For the demonstration we used Bison Poly Max (All Surfaces) which were mentioned: Indoor/Outdoor, Permanent Elasticity, Very Strong.

Layers of adhesive are applied to the plate, at equal distances, along the entire length of the plate.

The plate is then fixed (preferably using a level) on the desired place (according to the product leaflet). Pay attention to the minimum application conditions. The place must be clean and dry. Press application must be consistent enough in time to ensure adhesion. Read the leaflet of the used product!

Example of mounting on a metal mailbox.

Example of installation on the decorative plaster.

Periodically (eg once a year) check the stability of the house number on the mounting surface by lightly pulling.

For mounting directly in masonry, an idea would be to use CM17 / CM25. Pay attention to the attachment points (not on the entire surface of the tile!) and to the existence of expansion joints (to prevent cracking in extreme temperature conditions).

Ceramic Printing Center cannot be held responsible for faulty installation or the quality of materials used for installation.